|From:||Mike||Electronic:||michael.schmitt -A- us.army.mil|
|Subject:||RE: 1949 Rear Fender Holes||Date:||Sun May 22 20:58:53 2011|
Thank you guys!, exactly what I needed. I knew Duane didn't do that on purpose but he bailed himself out with the measurements. And the good Dr. made me feel even better, the pictures were as helpful as Duane's instructions. I have 4 other "Hummers" but this is my first "Rubber Band", all I had to start this project was a frame and a couple boxes of junk parts, most of them wrong.|
Thanks again guys! Mike
----- ORIGINAL MESSAGE FOLLOWS -----
I'm trying to put a '49 S together using one of Duane's rear fenders but it came with only the 3 tail light mounting holes. Could somebody please give me a measurement to correctly locate the hole for the tail light wire? I also need the hole location for the front of the rear fender where the wire harness comes out. I am guessing that the '49 did not have the two terminals installed in the fender itself. A picture of the fender area and wiring behind the horn would be great too! Duane? Anybody?