From:Jhn Dutra Electronic:JMDUTRA -A- LIVE.COM
Subject:RE: still looking for an answer Date:Mon Jun 27 08:45:46 2011
Response to:16024
Doug, I would say your looking at 3/16 toward the front of the motor at its narrowest gap and approx 1/4" at the rear between the bottom of the case and the top of the FOOTPEG TUBE. Its a little tricky due to the cases not running parralell with the bottom tube.
Good Luck , J.D.

----- ORIGINAL MESSAGE FOLLOWS -----
I'm having new motor mounts welded onto my frame but neglected to measure the gap between the bottom of the motor and the frame before I removed the old ones. If someone could measure this gap for me on their bike it would be greatly appreciated.

Thanks,doug