From:Mike Electronic:michael.schmitt-A-us.army.mil
Subject:RE: foot peg installation Date:Sun Sep 18 22:03:00 2011
Response to:16319
Jerry,
Went out and looked at my "barn fresh" unrestored '58 ST, the footpeg rubbers are installed exactly as Robbie said, looking at the end of the right peg the "Harley-Davidson" is at about 10 o'clock postion and yes, it is upside down and backwards. the left peg is at about 2 o'clock and reads correctly. Both the rubbers are stuck tight and don't appear to have been moved for a LONG time. So I would guess that at least some of the folding peg rubbers were installed with the wording to the rear and in-line with the notch. My guess is that they were installed this way to prevent quick wearing of the Harley-Davidson script, if they were installed in the straight up position your foot would quickly wear the words away.

OK, how about the script on the handgrips?
Mike

----- ORIGINAL MESSAGE FOLLOWS -----
For a 1953 Model 165 (and possibly other years/models), what is the correct foot peg orientation? Should "Harley-Davidson" be on the top, bottom, trailing edge, or leading edge of the peg? I've looked at my original Pohlman prints for 125, 165, and Model K foot pegs. The "K" seems to have "Harley-Davidson" on the trailing (rear) part of the peg (rider's manual view with camera looking straight down at the bike). Several end-views of other foot pegs show the mold-line offset 45 degrees from the vertical. None of my 3/4 front views (two-strokes and "K") display "Harley-Davidson" to the viewer. Unfortunately I have no 3/4 rear views of the two-strokes or the "K." All of this suggests that looking from the right side "Harley-Davidson" would be at the nine or ten o'clock orientation (rear of peg). Likewise, this suggests that looking from the left side "Harley-Davidson would be at the three or two o'clock position (rear of peg). So, how about it? Are there any barn fresh "Hummers" that yield an answer? Or is this one of those "fielder's choice" matters that varied on the assembly line?