|Subject:||RE: 54 165 ST Wiring Harness||Date:||Thu Jun 21 12:31:52 2012|
There are no black wires to the regulator. There should be 2 wires from that harness that go to the rear fender terminals, a black and a green wire. They should be approximately the same length at the back end when the other ends are connected to the switch and the coil. Do you have a wiring diagram? The hookup should be illustrated on it. jim Garrett
----- ORIGINAL MESSAGE FOLLOWS -----
In my new harness there is a black wire that is coming from the ignition going to a terminal screw on the front of the rear fender.
Every pre-cut wire in the harness is perfect except this one is too short. However it will reach some point on the voltage regulator, QUESTION; Is there a point on the regulator that this can go to ??