From:Rachel Siordia e-mail:rachiepie71-A-yahoo.com
Subject:RE: RE: '51 125s novice questions Date:Mon Nov 25 19:42:57 2013
Response to:16979
Just wanted to say "HI" as you are a fellow "51 owner. I just biught my first one!!
Rachel

----- ORIGINAL MESSAGE FOLLOWS -----
Keith,
The pinch bolt that goes into the top triple clamp and holds the handlebar stem is Harley's part #4020: 5/16-24 N.F. x 1-3/8 hex head bolt. On the '48-'50 models it was called an upper snubber bracket clamp bolt, on the '51 and newer TeleGlide fork models the parts catalog called it a Fork Upper Plate Bolt, same part, same purpose.
Mike

----- ORIGINAL MESSAGE FOLLOWS -----
1. Is there a pinch bolt that goes on the front end just below where the handlebars go into it that squeezes the handlebars stem? If so, what is the part number?

2. On the grip retainers, does a set screw go in one of the holes first, then the retainer screw over the top of it?

3. What screws are used to mount the battery/regulator tray? I have the one furthest left. Are the other 2 the same?

4. What all clips do I need for cables and wiring?

I have alot more, but don't want to go overboard. Thank you to any help I can get. I just got it running but it needs alot of the little type things.