From:Duane Taylor e-mail:duane-A-taylorclassiccycles.com
Subject:RE: Bullet Taillight Missing Part Date:Thu Oct 15 13:19:31 2015
Response to:20803

PATRICK;
WHAT YOU NEED IS PN 68105-20. SPRING RING. THIS HOLDS
THE LENSES IN PLACE.
THE BLACK "RING" YOU HAVE POINTED TO IS PART OF THE LENS CUP. YOU HAVE AN ORDER COMING MY WAY FOR A TAIL LIGHT WHICH YOU WILL NOT NEED. THE SPRING RING WILL DO THE
JOB AND SAVE YOU $162 DOLLARS. THERE ARE TWO DIFFERENT
SPRING RINGS, ONE IS SOLID ROUND WIRE AND THE OTHER IS A
FLAT WIRE AS SHOWN IN THE 48-55 PARTS BOOK. I HAVE
NOS SAMPLES OF BOTH BUT ONLY THE ROUND SPRING RING
IS CURRENTLY AVAILABLE HERE AND ELSEWHERE AS FAR AS I KNOW.

DUANE TAYLOR







----- ORIGINAL MESSAGE FOLLOWS -----
Howdy everyone,
I have a bullet taillight for my 51s. I have the baseplate, the shroud that covers the lenses, the gaskets, the lenses and the retaining spring. However, I don't have the "basket" that the lenses sit in that clips to the shroud. Does anyone have one that I can buy from them? I'm not sure what the part number is as I don't see it in the parts book or in the repair manual. Should look like the part in the pic attached.