From:Patrick e-mail:Patrickloree-A-gmail.com
Subject:RE: RE: Bullet Taillight Missing Part Date:Thu Oct 15 16:54:37 2015
Response to:20805
Duane, I don't have the lens cup. That's the part I'm missing. I'd like to still
get the full taillight and if you have an extra lens cup I'd like to buy that too
so that I may have two complete taillight assemblies as I will need another
for my 48 anyway.

----- ORIGINAL MESSAGE FOLLOWS -----

PATRICK;
WHAT YOU NEED IS PN 68105-20. SPRING RING. THIS HOLDS
THE LENSES IN PLACE.
THE BLACK "RING" YOU HAVE POINTED TO IS PART OF THE LENS
CUP. YOU HAVE AN ORDER COMING MY WAY FOR A TAIL LIGHT
WHICH YOU WILL NOT NEED. THE SPRING RING WILL DO THE
JOB AND SAVE YOU $162 DOLLARS. THERE ARE TWO DIFFERENT
SPRING RINGS, ONE IS SOLID ROUND WIRE AND THE OTHER IS A
FLAT WIRE AS SHOWN IN THE 48-55 PARTS BOOK. I HAVE
NOS SAMPLES OF BOTH BUT ONLY THE ROUND SPRING RING
IS CURRENTLY AVAILABLE HERE AND ELSEWHERE AS FAR AS I
KNOW.

DUANE TAYLOR







----- ORIGINAL MESSAGE FOLLOWS -----
Howdy everyone,
I have a bullet taillight for my 51s. I have the baseplate, the shroud that
covers the lenses, the gaskets, the lenses and the retaining spring.
However, I don't have the "basket" that the lenses sit in that clips to the
shroud. Does anyone have one that I can buy from them? I'm not sure
what the part number is as I don't see it in the parts book or in the repair
manual. Should look like the part in the pic attached.