From:Harry McGill e-mail:Two-Wheeler-Harry-A-juno.com
Subject:RE: Electrical issue with 63 scat Date:Sun Jun 5 00:01:23 2016
Response to:21287
See if you have a voltage at the Ignition point terminals. Could be contact points
are glazed, not making good contact. Reminder: Spark is produced when contact
points OPEN , power to the coil cut, causing the coils magnetic field to collapse
and induce the high voltage to the spark plug.
Harry

----- ORIGINAL MESSAGE FOLLOWS -----
Help!im trying to get my restored 63 scat started, and seem to have a
problem!
I don't seem to have spark at the spark plug. The motor was restored rebuilt a
couple years ago but I've never had it started.
I also put. A new wiring harness.
Now I notice when I'm kicking it, if I hold the horn button in while kicking, the horn
will go off in a pattern like the engine turning over. But, the bike doesn't seem to
have spark at the spark plug. Yet I've checked all connections
So now I don't understand why the horn wire seems hot, but bike doesn't have
spark or start.
Thanks in advance.. Gene

Sent from IP Address: 68.7.229.151
Lookup 68.7.229.151

Reverse Telephone Lookup