From:Trent e-mail:johnsont-A-americanchiller.com
Subject:1960 Super 10 Date:Mon Oct 3 16:27:00 2016
I rebuilt my Super 10 about a year ago and have been enjoying it. One issue I have had is the carburetor. Seems to always be out of adjustment. Carburetor was completely gone through but I still wasn't happy with the results. I researched online for the Tillotson MT carburetor rebuild kits / extra parts etc. with limited success. From what I understand the Super 10 has 2 thru holes on the main jet and other models vary from that. I found a good alternative to a rebuilt 56 year old MT82A Tillotson carb. It comes with 2 thru holes and is completely new. The float is even set up identical to the Tillotosn. These guys make this carb for a Cushman but check it out... I'm totally stoked to have a new carb on my 1960 Super 10.

http://dennis-carpenter.com/new-carburetorside-fuel-inlet/p/806934/

Thought I'd share this since I've received so much help from this site. Hope my input is helpful. I'm going to keep my original Tillotson MT82A for nostalgic reasons just in-case.

Sent from IP Address: 198.0.234.187
Lookup 198.0.234.187

Reverse Telephone Lookup