From:Bryan e-mail:tr6bw1-A-juno.com
Subject:RE: RE: RE: RE: RE: 1960 Super 10 Date:Sun Oct 9 20:11:33 2016
Response to:21547
Thanks for the info

----- ORIGINAL MESSAGE FOLLOWS -----
It was an easy install. I need to adjust the throttle linkage a little still but it works
great. Rode the bike for about an hour on hills, flats etc. Worked and ran better
than it ever has. If you choose to go this route make sure you have the proper
amount of holes in the main jet. The Super 10 has 2 thru holes in the main jet...
that's how the new carburetor comes as well. If you have another model the
number of thru holes may be different. There is a good post on this site that
shows how many holes your main jet has (I think it varies from 2 to 5 holes).
Overall this is a great option if you want a new carburetor for reliable operation (in
my opinion). I'm sure there are those that would disagree, but these Tillotson MT
carbs are getting harder and harder to find in descent/rebuildable condition.


----- ORIGINAL MESSAGE FOLLOWS -----
Yes let me know how it runs

----- ORIGINAL MESSAGE FOLLOWS -----
The carb looks identical. I'm putting it on the bike this weekend and putting it
through its paces. I'll let you know how it goes.

----- ORIGINAL MESSAGE FOLLOWS -----
How does you bike run with new carb?
Does this carb look identical?

----- ORIGINAL MESSAGE FOLLOWS -----
I rebuilt my Super 10 about a year ago and have been enjoying it. One issue I have
had is the carburetor. Seems to always be out of adjustment. Carburetor was
completely gone through but I still wasn't happy with the results. I researched
online for the Tillotson MT carburetor rebuild kits / extra parts etc. with limited
success. From what I understand the Super 10 has 2 thru holes on the main jet
and other models vary from that. I found a good alternative to a rebuilt 56 year old
MT82A Tillotson carb. It comes with 2 thru holes and is completely new. The float
is even set up identical to the Tillotosn. These guys make this carb for a Cushman
but check it out... I'm totally stoked to have a new carb on my 1960 Super 10.

http://dennis-carpenter.com/new-carburetorside-fuel-inlet/p/806934/

Thought I'd share this since I've received so much help from this site. Hope my
input is helpful. I'm going to keep my original Tillotson MT82A for nostalgic
reasons just in-case.

Sent from IP Address: 71.244.101.13
Lookup 71.244.101.13

Reverse Telephone Lookup