From:backyard bob e-mail:somewhere-A-newjersey
Subject:RE: Speedometer Cable Date:Thu Oct 27 21:16:54 2016
Response to:21581
Heat yes...and 'Blaster' (NAPA auto). Wrap a cloth around
it and wiggle it with channel lock pliers.

----- ORIGINAL MESSAGE FOLLOWS -----
I have a 1960 Super 10. Everything works great on the bike
except for the speedo. I had the speedo restored and I've
tested it. It works. The problem, I believe, is in the
wheel. Problem is I can't get the darn plug at the end of
the speedo cable to come out. It's stuck in there. It
comes out about an 1/8 of an inch maybe and then won't
budge. Any ideas? I've tried some lube around the hole
but that didn't do it. Should I apply some heat? Should I
emery cloth the plug before re-installing next time? BTW I
can remove the inner speedo cable... I'm thinking either a
gear broke or the cable broke at the end.

Sent from IP Address: 67.237.0.56
Lookup 67.237.0.56

Reverse Telephone Lookup