|Subject:||RE: 1959 Hummer power delivery problems||Date:||Thu Jan 12 15:25:59 2017|
HAS YOUR ENGINE BEEN REBUILT?? IF SO, HOW LONG AGO.
YOUR DESCRIPTION OF TROUBLE SOUNDS MORE LIKE THE LOWER END NEEDS ATTENTION.
----- ORIGINAL MESSAGE FOLLOWS -----
My Hummer is very sluggish and won't get much over 30mph downhill (180 lb. rider).
Replaced: fuel hoses, petcock, gas cap, float bowl gasket, spark plug
Cleaned: gas tank, carb, jets, float, et al
Problem: idles fine but does not deliver crisp power response when throttle is twisted. Especially bad when in gear. Very, very sluggish. Runs much better when partially choked.
Questions: which screw on the Tillotson M43B does what? I'm assuming I have a mixture problem (air/fuel) but I'm really not experienced enough to know if it isn't something else.
What are standard start-out settings for the screws? I can see 3 that can be adjusted besides the throttle butterfly stop screw.
If I can't figure it out my next option is to take it to a small engine mechanic that specializes in two stroke motors/carbs. Don't really want to do that just because I'm stubborn ;)
Thanks in advance.