From:Brent Dugan e-mail:cdf959-A-embarqmail.com
Subject:RE: RE: RE: RE: RE: RE: '62 Pacer Toolbox Date:Thu Mar 30 22:29:53 2017
Response to:21876
Bought a NOS toolbox, with tools, years ago from a dealer
that had the HD tag that said... -55a. It came with the
frame bracket, screws and literature. I sold it to help
my daughter a few years back to a guy I believe lives in
Canada.....but I'm probably wrong as I'm getting old and
decrepit. If you're 'that guy' please take photos and
post them.

----- ORIGINAL MESSAGE FOLLOWS -----
I bought a NOS tool box, with all the tools and the u
bracket from Mike Lewis H-D in Lawton about 15 years ago.
The door closed perfect. I think some did and some didn't

----- ORIGINAL MESSAGE FOLLOWS -----

RE 61-62 Tool box. I have many (useless/rusted) original
tool boxes but have never seen a 64202-61. When I
reproduced the tool box I did not know there was a
variant
and would like to see one or good pictures of the "dent"
and extra hole.
Of interest (at least to me):
The original tool box lid (at the open end ) did not fit
well, binding on the box on closure. The problem and fix
was obvious but HD never changed it for reasons unknown
??

Duane Taylor







----- ORIGINAL MESSAGE FOLLOWS -----
I just happen to have a NOS one around here somewhere. I
can dig it out and take a photo if desired.

Mutt is correct - there's an extra hole on the back. If
I
remember correctly, there's a little "dent" in the back,
so the extra hole is at an angle. Not 100% sure, though.

The 1955-1959 Hummers, and 1960-62 bikes did not have the
toolbox mounting bracket on the frame, so a little U-
shaped bracket is required to slip over the frame. Not
sure if these were included with the toolbox or sold
separately.

Dave


----- ORIGINAL MESSAGE FOLLOWS -----

Also the 61-62 BT models have a special tool box. It as 2
holes in the back for mounting, instead of one on all the
other models, due to the 16" wheels. Very hard to find in
any condition



----- ORIGINAL MESSAGE FOLLOWS -----
Tools boxes were an accessory on 55-62 B BT BTH BTF
models

----- ORIGINAL MESSAGE FOLLOWS -----
Just curious if the '62 Pacer came with a toolbox like
the
165's, if a toolbox was an option, or if the Pacer had
something else (like a tool roll).

I have looked at a lot of pictures and have not been able
to
tell from what I found.

Thanks for any assistance

Sent from IP Address: 184.6.219.221
Lookup 184.6.219.221

Reverse Telephone Lookup