From:Mutt e-mail:pigstye13-A-aol.com
Subject:RE: RE: RE: RE: RE: RE: RE: RE: RE: RE: RE: Just bought a 165 ???? Date:Tue May 30 08:07:26 2017
Response to:22016
That number is a casting number.It's on all frames from
1953 onward.

----- ORIGINAL MESSAGE FOLLOWS -----
I found a part number on the neck, not what you described
though. It is # 47454-53. I don't see that number listed
on the frame page.

----- ORIGINAL MESSAGE FOLLOWS -----
Yes, there is. Look on the lower left side of the
steering
head (neck), you will see a 1/4" tall single letter and
number stamped there, like B 1 which would indicate the
frame being made in February 1961. The high mounts for
the
Scat fender are just 4 half circle clamps that wrap
around
the fork tubes and the end of the fender struts bolt to
them.


Mutt

----- ORIGINAL MESSAGE FOLLOWS -----
So next, the frame. It appears the fork is correct as the
fender mount is not threaded, so it is later.But is there
anything I can verify that the frame is '61, or at least
correct for the '61?

Sent from IP Address: 12.87.28.130
Lookup 12.87.28.130

Reverse Telephone Lookup