From:Mutt e-mail:pigstye13-A-aol.com
Subject:RE: RE: RE: RE: RE: RE: RE: RE: RE: RE: RE: RE: Just bought a 165 ???? Date:Tue May 30 08:16:29 2017
Response to:22017
didn't have time yester evening to get some pics, so I did
first thing this morn. Here is the left side of a random
frame

----- ORIGINAL MESSAGE FOLLOWS -----
So I believe this frame to be used from 53-59. Since I
have the 59-up speedometer . .seems I could build this as
a '59 ? I know it is a Frankenstein, but it seems my
parts would best match to build it looking like a '59.

----- ORIGINAL MESSAGE FOLLOWS -----
I found a part number on the neck, not what you described
though. It is # 47454-53. I don't see that number listed
on the frame page.

----- ORIGINAL MESSAGE FOLLOWS -----
Yes, there is. Look on the lower left side of the
steering
head (neck), you will see a 1/4" tall single letter and
number stamped there, like B 1 which would indicate the
frame being made in February 1961. The high mounts for
the
Scat fender are just 4 half circle clamps that wrap
around
the fork tubes and the end of the fender struts bolt to
them.


Mutt

----- ORIGINAL MESSAGE FOLLOWS -----
So next, the frame. It appears the fork is correct as the
fender mount is not threaded, so it is later.But is there
anything I can verify that the frame is '61, or at least
correct for the '61?

Sent from IP Address: 12.87.28.130
Lookup 12.87.28.130

Reverse Telephone Lookup