From: | Jim Callahan | e-mail: | blue66holden-A-gmail.com |
Subject: | RE: RE: rework handle bars | Date: | Wed Jun 7 22:26:14 2017 |
Response to: | 22050 |
Thanks Mutt! ----- ORIGINAL MESSAGE FOLLOWS ----- Jim, I fix those many times a year. The slot is 3/16" wide (so it matches the 3/16" pin inside the next stem). TIG up one side of the slot, then hand grind or file it straight again, Go to the opposite side and do it again. Continue til all 4 sides are straight and the slot is 3/16" Use the solid end of a 3/16" drill bit for a guide. Mutt ----- ORIGINAL MESSAGE FOLLOWS ----- Anyone have any suggestions how to rework the handlebars. As you can see from the photo, the slots are in bad shape where they feed into the stem. Looks like somebody might have built them up with weldment in the past. Anyone got the dimensions? Cheers, Jim |
Sent from IP Address: 67.184.43.242
Lookup 67.184.43.242
Reverse Telephone Lookup