From:Mike Electronic:michael.schmitt-A-us.army.mil
Subject:RE: carb cover screw size Date:Fri Feb 10 20:31:31 2012
Response to:16948
Bill,
What carb? The "Hummer" Tillotson carbs had 3 of the part# 1065W screws which were 8-32 x 1/2 fillister head screws. The Linkert carbs had 2 special screws holding the cover over the float, they were not common hardware items and carried a unique part number associated with the assembly they fit on; 27509-47, what made them unique was the tapered shoulder on the screw which "captured" it in the cover and allowed it to turn free in the cover while tightening down into the carb body.
Mike

----- ORIGINAL MESSAGE FOLLOWS -----
hi i cant seem to fnd the size of the carb cover screws any help? thanks bill