From:Harry McGill Electronic:IB2Wheeler -A- juno.com
Subject:RE: RE: RE: RE: RE: RE: Need connecting rod with needle bearing top for 49 125 Date:Mon Feb 13 16:14:26 2012
Response to:16959
The upper bore on both the 24207-47(1)or(2) are the same. Approximately.745 and the GB-910 needle bearings are what I removed in engines I have taken apart. GB-910 bearings have an OD of .750 and it is a press fit. if that helps.

Harry

----- ORIGINAL MESSAGE FOLLOWS -----

Sorry its 24207-47-01
----- ORIGINAL MESSAGE FOLLOWS -----
Thanks It is 24207-01

----- ORIGINAL MESSAGE FOLLOWS -----
Hi Ron. Does your existing rod have a casting number 24207-47?
Harry

----- ORIGINAL MESSAGE FOLLOWS -----

Thanks Harry, but Im looking for a later needle bearing top rod to modify my older motor with a bushing. Ron
----- ORIGINAL MESSAGE FOLLOWS -----
You can check Timken Bearing GB-910, available most bearing suppliers. Detail info: http://www.applied.com/apps/commerce/catalog/catalog.do

Harry

----- ORIGINAL MESSAGE FOLLOWS -----
I need a needle bearing top rod for my 125 rebuild. Also a clutch hub 49 125 Thanks Ron