From:	Scott Allen	e-mail:	villa211-A-aol.com
Subject:	RE: RE: Rod Bearings	Date:	Wed Nov 5 18:55:10 2014
Response to:	19975

Thank you for the quick reply. My machine is a 63 Scat and the pins measure .121" It has been apart before, someone really tore the plates up. The rod and crank pin look good, I think .122" pins would tighten it up. Does anyone sell these oversize rollers. Thanks again, Scott ----- ORIGINAL MESSAGE FOLLOWS ----- depends on what year/ 48-60 models use .250" x .490 long 61 to 66 use .120" diameter needles ----- ORIGINAL MESSAGE FOLLOWS ----- Can someone please tell me what the stock dimension is for the crank pin roller bearings? Thanks, Scott