From:Bruce Mackenzie
Subject:RE: Piston help Date:Wed Dec 6 12:57:37 2017
Response to:22411
Adam Give me a call i'll be glad to help you with your
piston issues. I can supply you with a piston, bore the
cylinder to fit with the correct clearence.

Hi All
The cylinder on my '63 Scat is measuring 2.414in. The
piston that was with the motor is a +30. Upon inspection,
the cylinder has defined cross hatchings and is worn around
the ports only. There is no scoring up and down the
cylinder or on the piston(has some wear on the skirt but
not much). I'd like to get a new piston kit and am
wondering if

Sent from IP Address:

Reverse Telephone Lookup