From: | Dave Hennessey | e-mail: | dave-A-toyhouse.org |
Subject: | RE: RE: Question on switch location for 1963 Pacer | Date: | Sat May 12 11:29:45 2018 |
Response to: | 22692 |
Here is the parts book illustration. You can see it on a bike in Dr. Pepper's posting in this topic. The mounting plate is just a piece of sheetmetal. These switches are a little hard to find. They often got broken/lost. The same switch and knob are used on Sportster XLCH in the early 1960s, so the Sportster guys tent to snarf them when they come up on eBay. ----- ORIGINAL MESSAGE FOLLOWS ----- I have a 63 scat, the switch is located on the left side on the upper triple tree. There is two threaded holes between the left fork and the head tube of the frame. My switch has long been in pieces but that is where it was when I got the bike in the early 70s Jay ----- ORIGINAL MESSAGE FOLLOWS ----- I recently purchased a 1963 Harley Pacer and have started the task of identifying the missing parts. I am using an original 1963 Harley Parts catalog listing the Scat- Pacer-Super 10-Model 165 and Hummer. For the most part I have been able to sort out the proper parts required along with their correct part numbers and their location. However, I am left scratching my head as to the location of the headlight switch as I have yet to find a picture showing it. Any help is appreciated. Thanks Don G. |
Sent from IP Address: 174.204.44.72
Lookup 174.204.44.72
Reverse Telephone Lookup