Fitting cylinder over rings

Here's where to ask questions and get answers

Fitting cylinder over rings

Postby Emerica1975 » Fri Sep 30, 2022 12:25 am

I’m having trouble getting my cylinder to fit over piston because it’s such a bugger getting the rings to stay closed at locating pin while trying to slide the cylinder down over the top. Does anyone have a better way to do this?
Thanks!
Emerica1975
 
Posts: 107
Joined: Fri Oct 29, 2021 11:13 am

Re: Fitting cylinder over rings

Postby 250_Sprint » Fri Sep 30, 2022 10:46 am

Make sure ring grooves are clean and rings do not stick.
Used a wide hose clamp making sure the ring end is at the ring stop.
Not too tight because the clamp needs to slide down piston.
Go slow when lowering the cylinder skirt over piston.
Use a lot of oil so as not to scratch piston.
Go slow.
Once the rings are in the cylinder, remove the hose clamp.
250_Sprint
 
Posts: 66
Joined: Fri May 29, 2020 10:59 pm


Return to HELP with Restoration and Running

Who is online

Users browsing this forum: No registered users and 2 guests

cron