Got a question on the carb for my 1951
What was the difference between S1 till S4 ?
I have a carb which does say S1 and one that does say S2 but this is just the top cap indication, as for the rrst they are identical
What I noticed is that the diameter from the cylinder outlet to the card is smaller than the carb hole itself, even with the thin seal which is supposed to be in there. So this made me wonder that I dont have an S1 but a higher number as I needed to make some piece to make the cylinder and carb fit properly together
This also made me wonder if there are other difference between the one I should have (1951 125cc) and the one im using now. Not that it matters much as the machine runs just fine, just curious
Thanks
Joep