Re-paint question, decals.

Here's where to ask questions and get answers

Re-paint question, decals.

Postby bobscogin » Sat Apr 06, 2019 5:58 pm

I'm refinishing the sheet metal on a '63 Scat and Pacer, and would like to replicate the original graphics. I'm using a base coat/clear coat urethane system. The plan is to apply the main color and white tank stripes using base coat, then apply the decals, then clear coat. Anyone have experience clear coating the water applied type of decals? I've done it successfully in the past using acrylic enamel, but was wondering if the catalized urethane paints would "lift" the decals. What's a good source for the decals? Advice is greatly appreciated.

Bob
bobscogin
 
Posts: 64
Joined: Tue Jun 05, 2018 7:40 pm

Re: Re-paint question, decals.

Postby HarleyHummer.com » Wed Apr 24, 2019 4:02 am

Decals can be purchased at Harley Hummer.com and include full instructions!
You will be fine!
After the decals are applied, use a very light and dry coat of clear.
Let it cure fully.
Then apply a second light and dry coat of clear.
Let it cure fully.
Then you can proceed with a final wet and heavy coat of clear!
HarleyHummer.com
 
Posts: 8
Joined: Thu May 24, 2018 8:04 pm
Location: Illinois

Re: Re-paint question, decals.

Postby bobscogin » Sun May 19, 2019 7:12 pm

Thanks for the reply and information!

Bob
bobscogin
 
Posts: 64
Joined: Tue Jun 05, 2018 7:40 pm

Re: Re-paint question, decals.

Postby Brent » Sun May 19, 2019 8:38 pm

When you're finished post pictures. I have a '62 Scat project in the works and may need to hire you in the not too distant future. In my area lower cost gets you what you pay for. The better painters are too expensive as they have a good stream of antique car buffs with money to burn. I'm building a rider so not looking for AMCA restoration judging.
User avatar
Brent
 
Posts: 109
Joined: Sun May 20, 2018 6:55 pm

Re: Re-paint question, decals.

Postby bobscogin » Sun May 19, 2019 10:23 pm

I'm shooting for a "rider quality" job. My son calls that "substandard workmanship". lol! I will post photos, Brent, but even though I appreciate the expression of confidence in my painting ability, I'd prefer just to screw up my own stuff instead of someone else's. :lol:

Bob
bobscogin
 
Posts: 64
Joined: Tue Jun 05, 2018 7:40 pm

Re: Re-paint question, decals.

Postby Brent » Mon May 20, 2019 7:27 am

Totally understandable, but it sure doesn't hurt to ask. Best of Luck with it.
User avatar
Brent
 
Posts: 109
Joined: Sun May 20, 2018 6:55 pm

Re: Re-paint question, decals.

Postby bobscogin » Mon May 20, 2019 9:43 pm

Thanks, Brent. Hope you can find someone to do the job for you.

Bob
bobscogin
 
Posts: 64
Joined: Tue Jun 05, 2018 7:40 pm


Return to HELP with Restoration and Running

Who is online

Users browsing this forum: No registered users and 28 guests

cron