1963 Scat front fender brackets.

Here's where to ask questions and get answers

1963 Scat front fender brackets.

Postby bobscogin » Sun Apr 28, 2019 6:58 pm

I'm seeing conflicting installation methods in the photos I've found. Do the lower ends of the front fender braces on my '63 Scat go outboard, inboard, or in between the lower bracket halves? Thanks.

Bob
bobscogin
 
Posts: 65
Joined: Tue Jun 05, 2018 7:40 pm

Re: 1963 Scat front fender brackets.

Postby Mutt » Sun Apr 28, 2019 8:37 pm

you should have 4 halves. 2 for each side. They wrap around the fork tube and connect to each end of the fender braces. There is also a bolt and spacer that connects the top of the fender to the bottom of the triple tree
Mutt
 
Posts: 237
Joined: Sat Jun 02, 2018 10:11 am

Re: 1963 Scat front fender brackets.

Postby bobscogin » Sun Apr 28, 2019 9:01 pm

Thanks, Mutt. I have the parts. I'm trying to figure out how the braces fit in relation to the clamp halves. The '62 Scat factory photo shows them outboard of the outer clamp half, while the '64 photo shows it sandwiched between the clamp halves clamp. I guess it's no big deal, just wondering which way is "correct".

Bob
bobscogin
 
Posts: 65
Joined: Tue Jun 05, 2018 7:40 pm

Re: 1963 Scat front fender brackets.

Postby Mutt » Sun Apr 28, 2019 9:30 pm

here is the Factory picture of the first swing arm Scat

63 Factory Scat left brace.jpg
63 Factory Scat left brace.jpg (106 KiB) Viewed 973 times
Mutt
 
Posts: 237
Joined: Sat Jun 02, 2018 10:11 am

Re: 1963 Scat front fender brackets.

Postby bobscogin » Sun Apr 28, 2019 10:55 pm

Thanks! That answers my question.

Bob
bobscogin
 
Posts: 65
Joined: Tue Jun 05, 2018 7:40 pm


Return to HELP with Restoration and Running

Who is online

Users browsing this forum: No registered users and 3 guests

cron