Page 1 of 1

1963 Scat front fender brackets.

PostPosted: Sun Apr 28, 2019 6:58 pm
by bobscogin
I'm seeing conflicting installation methods in the photos I've found. Do the lower ends of the front fender braces on my '63 Scat go outboard, inboard, or in between the lower bracket halves? Thanks.

Bob

Re: 1963 Scat front fender brackets.

PostPosted: Sun Apr 28, 2019 8:37 pm
by Mutt
you should have 4 halves. 2 for each side. They wrap around the fork tube and connect to each end of the fender braces. There is also a bolt and spacer that connects the top of the fender to the bottom of the triple tree

Re: 1963 Scat front fender brackets.

PostPosted: Sun Apr 28, 2019 9:01 pm
by bobscogin
Thanks, Mutt. I have the parts. I'm trying to figure out how the braces fit in relation to the clamp halves. The '62 Scat factory photo shows them outboard of the outer clamp half, while the '64 photo shows it sandwiched between the clamp halves clamp. I guess it's no big deal, just wondering which way is "correct".

Bob

Re: 1963 Scat front fender brackets.

PostPosted: Sun Apr 28, 2019 9:30 pm
by Mutt
here is the Factory picture of the first swing arm Scat

63 Factory Scat left brace.jpg
63 Factory Scat left brace.jpg (106 KiB) Viewed 7255 times

Re: 1963 Scat front fender brackets.

PostPosted: Sun Apr 28, 2019 10:55 pm
by bobscogin
Thanks! That answers my question.

Bob