Page 1 of 1

48 rear sprocket

PostPosted: Sun Sep 15, 2019 1:08 am
by stans48s
did all 48 models come with the rear sprocket held on with small bolts and nuts?, look like a number 10 screw. The nuts on mine look like they are welded to the small bolts. Is this normal, or did someone do this? Stan

Re: 48 rear sprocket

PostPosted: Sun Sep 15, 2019 11:22 am
by Mutt
ALL models came with the rear sprocket RIVETED to the hub

Re: 48 rear sprocket

PostPosted: Sun Sep 15, 2019 11:51 am
by stans48s
I thought that was a little odd for Harley to bolt on the sprocket. Someone went to a lot of trouble to mill a recess in the sprocket for the nuts to clear. Stan

Re: 48 rear sprocket

PostPosted: Sun Sep 15, 2019 6:03 pm
by Mutt
Harley dd that. It is a "replacement" sprocket, for those unfortunate enough to not have the rivet fixture like I do !!!

Re: 48 rear sprocket

PostPosted: Sun Sep 15, 2019 6:31 pm
by peteg59
So this bolt on was done at the MOCO, or at a dealership?
I've never seen the bolt on sprocket anywhere on the early 125!
They must be rare as hens teeth!?

Re: 48 rear sprocket

PostPosted: Sun Sep 15, 2019 6:48 pm
by Mutt
Part # 41476-52. It was made by Harley, sold at the dealer and either the dealer or the customer would install it. These came out just about the time the S model was phased out.

Fatal: ./cache/ is NOT writable.