Page 1 of 1


PostPosted: Tue Apr 13, 2021 9:55 pm
by John
I am in the process of lacing the wheels on my 1963 Pacer. Does anyone know how much torque to apply to the spoke nipples? There is no information on this in the shop manual.

Re: Spokes

PostPosted: Sun Apr 18, 2021 1:28 pm
by HarryM
Old school method: Tighten with finger tips only. Use a small screwdriver or wrench and drop test each spoke, if tight it will PING. if not it will THUD. Providing you can hear and not as deaf as I am.