Ok thanks for the suggestions. I will take the carb apart one more time just to check. I does not hurt as it is very easy. I will disassemble once again, clear all the ports. I will also check for fuel flow before I put it back on the bike. I will also leave the carb in the ultrasound for an extended length of time. It is a very simple carb, but you are right it never hurts.
Is the #5 jet supposed to be 50 thousands of an orifice? Does it need to be bigger?
Thanks again. Remember that this was in baskets when we started I have nothing to base the condition on before we started the project.