Mag ignition

Here's where to ask questions and get answers

Re: Mag ignition

Postby Backyard Bob » Wed Aug 21, 2019 9:30 pm

If you hold a screw driver next to the rotor and it pulls it in like John Wayne chasing the bad guys then it's probably okay. If it's more like Pee Wee Herman then Mutt's your choice. He's probably the only one left out there that does this.
Backyard Bob
 
Posts: 12
Joined: Sun Feb 10, 2019 9:00 pm

Re: Mag ignition

Postby schrizo » Wed Aug 21, 2019 11:46 pm

CHECK for voltage at the coil. sometimes its the smallest thing.
schrizo
 
Posts: 11
Joined: Mon Jul 30, 2018 10:24 pm

Re: Mag ignition

Postby schrizo » Wed Aug 21, 2019 11:46 pm

CHECK for voltage at the coil. sometimes its the smallest thing.
schrizo
 
Posts: 11
Joined: Mon Jul 30, 2018 10:24 pm

Re: Mag ignition

Postby KJohn » Thu Aug 22, 2019 9:34 am

One problem I had was that I accidentally grounded the points at the connection. Check to be sure your connector is only touching the points, not grounding against the inner case.
John
KJohn
 
Posts: 9
Joined: Sat May 25, 2019 1:35 pm

Re: Mag ignition

Postby bbtwoscoot » Thu Aug 22, 2019 8:31 pm

Thanks Mutt, would you mind emailing me at bb2scoot@msn.com
bbtwoscoot
 
Posts: 7
Joined: Sat Aug 17, 2019 7:05 pm

Re: Mag ignition

Postby bbtwoscoot » Thu Aug 22, 2019 8:41 pm

Thanks again Bob, will give it a try.
bbtwoscoot
 
Posts: 7
Joined: Sat Aug 17, 2019 7:05 pm

Re: Mag ignition

Postby Mutt » Thu Aug 22, 2019 10:03 pm

Will do
Mutt
 
Posts: 228
Joined: Sat Jun 02, 2018 10:11 am

Previous

Return to HELP with Restoration and Running

Who is online

Users browsing this forum: No registered users and 1 guest

cron